Items needed:
-Motul Gear 300 75w90 - 3 liters required
(Can be purchased from PureMS.com for $15.95)
-17mm deep socket
Write up coming soon.
---------------------------------------------------
How to (#1)
---------------------------------------------------
Always loosen the 'Fill' plug (on the drivers side, near the CV joint) first. Make sure you can get it out before draining the transmission!
Either on a hoist, or jacked up so the car is level...
Loosen the fill plug,
Loosen the drain plug, place a pail under, and remove the plug.
Allow it to drain, replace the fill plug, torque to spec in Bentley. Fill in the fill hole... it's a pain to get in there, you might want to use an oil pump, or a piece of hose.
---------------------------------------------------
How to (#2)
---------------------------------------------------
losen the side plug FIRST
then put something to catch oil with.
loosen the bottom one...
let it drain.
tighten the bottom one back up
make sure your car is level
start filling it back up from the side plug
when its the oil start poring out from the side, that means you are done.
tighten the bolt back up
