Remove 3 bolts holding down rear center console (2 back by the rear ash tray, and one under little plastic cap behind shifter)
Remove parking brake grip by inserting flat screwdriver in slit on passenger side of grip. Lift plastic tap over catch pin (hidden), while pulling grip forward.
Remove parking brake sleeve by prying tabs out from underside of lever. Then remove console unit. * You can avoid steps 2 and 3 by lifting the handbrake as far as possible, then pulling the rear console up and back as far as it will go on the handbrake lever. Make sure that you don't damage the wires for the diff lock or ashtray light.
Unscrew shift knob, and remove shift boot (optional).
Pry wood pannel from AC control unit, use thin flat object (kithchen knife). Remove two screws at bottom of space holding a plastic retaining bracket for the gauges.
Pull gauge console forward to gain access to back of gauges. You can now see the bulb sockets plugged into the gauges.
Remove and replace bulbs. P/N for bulbs is N 017 751 2 (12V, 1.2W).
