Audi20v.net

  • Full Screen
  • Wide Screen
  • Narrow Screen
  • Increase font size
  • Default font size
  • Decrease font size

Rear Tail Light Leaks

E-mail Print PDF

Symptoms: Water visible inside taillight, water seeping inside trunk/hatch, water collecting in right side storage bin (Coupe). The foam adhesive between the taillight and the body can be a source of the leaks.
  1. Remove interior trim, then unbolt tailight assembly from inside the trunk. (This may require removing the license plate and center panel -- be careful not to crack the panel.)
  2. GENTLY persuade the tailight assembly to separate from the body. Patience is a virtue.
  3. Pull off the old gasket, and clean the adhesive and gasket bits off of the body and tailight assembly.
  4. Find an auto parts store or autobody supply shop that carries 3/4 inch butyl window "tape". It's sticky black and playdough-like. Try 3M 08614 for about $10. Apply it to the tailight assembly and remount on the body.
  5. Reassemble all parts in reverse order.
  6. Or CHECK OUT THIS DETAILED (w/BIG! Pics) ACCOUNT BY Jer right here

If the leak water is collecting in the passenger side housing, the problem might be with the lock/push button release for the hatch. Push the button in and look for cracks. They can be sealed with silicone adhesive or other weather-proof goop.